Volvo D12DAAE2 Engine Tuning

Engine timing is a crucial task to ensure optimal performance and engine longevity. In this blog, Taoparts experts will guide you through the process of tuning the Volvo D12DAAE2 engine, used in the A35D articulated dump truck. We will also discuss the specific tolerances for the intake and exhaust valves.

Materials Needed

  • Adjustment tools (torque wrench, micrometer, valve gauge)
  • Volvo D12DAAE2 engine service manual
  • New engine oil and filters
  • Protective gloves and glasses

Engine Tuning Steps

Volvo A35D swing motor

1. Preparation

  • Disassembly: Start by disassembling the engine and making sure all parts are clean and free of debris.
  • Component Inspection: Inspect engine components such as pistons, connecting rods, and rings to make sure there is no damage.

2. Adjusting the Intake Valves

  • Valve Clearance: Use the valve gauge to measure the intake valve clearance. Adjust the valves to the specified tolerance of 0.2 mm.
  • Check: Check the valve clearance again to make sure it is within tolerance.

3. Adjusting the Exhaust Valves

  • Valve Clearance: Similar to intake valve adjustment, measure the exhaust valve clearance and adjust to the specified tolerance of 0.5 mm.
  • Check: Check the exhaust valve clearance again to ensure it is within tolerance.

4. Displacement Adjustment

  • Compression: Perform a compression test to ensure the engine is under proper pressure.
  • Cylinder Adjustment: Adjust the cylinders to service manual specifications.

5. Assembly and Testing

  • Reassembly: Reassemble the engine and replace all components that were removed.
  • Functional Tests: Perform functional tests to ensure that the engine runs properly and without problems.
Volvo D12DAAE2

Conclusion

Volvo D12DAAE2 engine timing is a detailed process that requires precision and attention to detail. By following these steps and ensuring that the valves are adjusted to the specified tolerances, you can keep your engine in top condition and extend its life.

The importance of a good timing cannot be underestimated. A well-tuned engine not only ensures smooth and efficient operation, but also prevents premature component wear. By keeping intake and exhaust valves within proper tolerances, combustion is optimized and engine power is maximized, resulting in superior performance and lower fuel consumption.

Additionally, regular engine tuning is essential to detect any potential problems early. By inspecting and adjusting valves and cylinders, mechanics can identify and correct small problems before they become major failures. Not only does this save time and money on costly repairs, it also extends engine life and ensures vehicle safety.

At Taoparts, our highly trained mechanics use the most advanced tools and techniques to perform engine tune-ups with the utmost precision. We are committed to quality and customer satisfaction, ensuring that every engine that passes through our hands performs to the best of its ability.

Proper care and maintenance of your A35D articulated dump truck not only improves its performance, but also ensures that it’s ready to meet any challenges that come your way on the jobsite. Trust Taoparts to keep your equipment in top condition and maximize its efficiency and durability.

Contact us for all your spare parts needs!

Do you need spare parts for your heavy machinery? Look no further. Contact Taopparts and we will provide you with the original spare parts you need to keep your machine running at peak performance.

www.taopparts.com

Valve adjustment in Komatsu engine

Valve timing on a diesel engine, such as the Komatsu SAA6D125E-5, is a critical procedure to maintain its optimal performance. This engine is mounted on Komatsu machines, such as the PC450LC-7 excavator, the WA480-6 loader or the HM300-2 articulated dumper. In this blog we will also address the verification of the axial play of the engine of this machine.

Komatsu SAA6D125E-5 Engine Valve Adjustment

1. Tools needed:

Before you begin, make sure you have the following tools on hand:

  1. Ratchet wrench: Useful for loosening and tightening valve nuts.
  2. Wrench and screwdriver set: To access the relevant engine parts.
  3. Calibration thickness gauge: Also known as gauges or calipers, it is used to measure the clearance between valves and camshafts.
  4. Torque wrench: Necessary to apply the correct force when tightening the valve nuts.
  5. Calibration Sheets: Provide precise specifications for valve adjustment.
  6. Engine service manual: contains precise information about the engine and manufacturer’s recommendations.

2. Preparation:

Locate the valves:

Identify the exhaust and intake valves on the engine. In the case of the SAA6D125E-5, this engine has 6 cylinders and 24 valves (12 exhaust and 12 intake).

Engine position:

Place the engine at the top dead center (TDC) of the number 1 cylinder. Consult your engine manual to find the reference mark on the crankshaft pulley.

What is an intake valve?

The intake valve is responsible for allowing the air-fuel mixture to enter the engine’s combustion chamber. During the intake phase of the engine cycle, this valve opens so that the mixture can enter and prepare for combustion.

What is an exhaust valve?

The exhaust valve, on the other hand, is responsible for expelling the burned gases resulting from combustion out of the combustion chamber. This valve opens during the exhaust phase of the engine cycle, allowing exhaust gases to be expelled through the exhaust manifold.

Main differences

  1. Function: The intake valve introduces the air-fuel mixture, while the exhaust valve expels the burned gases.
  2. Temperature: The exhaust valves support higher temperatures due to the hot combustion gases, reaching between 600º and 800º Celsius, while the intake valves handle lower temperatures, between 200º and 400º Celsius.
  3. Material: Exhaust valves are made of more heat-resistant materials, such as stainless steel alloys, to withstand high temperatures.
  4. Size: Intake valves are usually larger than exhaust valves to allow greater air intake and improve engine efficiency.

3. Measurement and Adjustment:

  • Exhaust valves:
  • Using the torque wrench, loosen the exhaust valve locknut.
  • Use the feeler gauges or calipers to measure the clearance between the cam and the valve. Adjust if necessary.
  • The recommended clearance for the exhaust valves is 0.71 mm
  • Intake Valves:
  • Repeat the same process for the intake valves.
  • The recommended clearance for the intake valves is 0.33 mm
komatsu engine valve adjustment

Tighten the locknut:

Once the valves are adjusted, tighten the locknut without moving the valve position. In the following image you can see a Taopparts mechanic carrying out this task.

Ajuste de valvulas

4. Verification:

1. Turn the engine:

Crank the engine manually several times to ensure there is no interference between the valves and pistons.

2. Check again:

Remeasure the valves after cranking the entire engine.

Make sure all valves are within the specified range.

Valve timing has a significant impact on engine performance. Here are some of the ways it affects:

  • Combustion Efficiency:
  • The valves control the air intake and exhaust gas output. If the valves are not properly adjusted, the air-fuel mixture may be inadequate, which affects combustion efficiency.
  • Power and Torque:
  • Incorrect adjustment can affect engine power and torque. Valves that are too tight or too loose can decrease overall power and performance.
  • Emissions:
  • Valves influence emissions. If the exhaust valves are not closed properly, exhaust gas leaks may occur, increasing pollutant emissions.
  • Noise and Vibration:
  • Poorly adjusted valves can cause excessive noise and vibration. Proper adjustment helps reduce these discomforts.
  • Engine Durability:
  • Poorly adjusted valves can cause premature wear on engine components such as camshafts and valve guides.

In summary, accurate valve timing is essential for optimal performance of the Komatsu SAA6D125E-5 engine in terms of power, efficiency and durability.

How to Check Axial Play on a Komatsu SAA6D125E-5 Engine

Axial play refers to the lateral movement allowed between the rotating parts of the engine. In the case of the Komatsu SAA6D125E-5 engine, it is important to check it to ensure optimal operation. Follow these steps:

  1. Preparation:
  2. Top Dead Center (TDC) Location:
    • Crank the engine manually until the number 1 cylinder reaches top dead center (TDC). Consult your manual to find the reference mark on the crankshaft pulley.
  3. Axial Play Measurement:
    • Use a magnetic dial gauge to measure axial movement in the crankshaft.
    • Place the dial gauge so that its tip touches the end of the shaft.
    • Rotate the crankshaft while checking the end play.
  4. Comparison with Specifications:
    • Consult the manual for the exact end play specifications for the SAA6D125E-5 motor.
    • The axial play should be in the range 0.14 – 0.315 mm.
  5. Registration and Document
    • Record the measured values ​​and any adjustments made on a recording sheet.
Magnetic comparator clock

At TaopParts, each Komatsu engine goes through a rigorous verification process before being offered for sale. Mechanics not only perform axial adjustment, but also perform compression tests and other evaluations to ensure the engine is in perfect condition.

At Taopparts, we are committed to offering the highest quality spare parts and services so that our customers can operate with maximum efficiency and peace of mind.

Contact us for all your spare parts needs!

Do you need spare parts for your heavy machinery? Do not look any further. Contact Taopparts and we will provide you with the original spare parts you need to keep your machine running at peak performance.

Direct contact form

Functional test en Taop Parts installation

In today’s post we provide a link list to our YouTube channel videos.

They show tests we carry out on each machine before proceeding with disassembly.

Our general functional tests are listed below:

Backhoe Loader WB93-R2 Komatsu:

Crawler Excavator Komatsu PC210LC-7K

Wheel Loader Komatsu WA4705-H

 

In the next videos, you will appreciate the functional tests of the engine:

S4D106-1F WB93-R2 Backhoe loader Komatsu

SAA6D102-E2 PC240NLC-7K Crawler Excavator Komatsu

You can find more videos in our YouTube channel.

Link of interest:

Tips for buying recycled spare parts for heavy machinery

In this article we will give you some tips on how to evaluate recycled spare parts based on technical information and photos. Continue reading Tips for buying recycled spare parts for heavy machinery

Maximize production with implement maintenance

To maximize the performance of any machine, it is very important to take care of your tools. It should be noted that attachments affect the longevity, productivity, fuel consumption and maintenance costs of your equipment.Find the used spare parts komatsu volvo jcb Continue reading Maximize production with implement maintenance

Buying a new machine or thinking about alternative solutions like leasing, renting or repairing?

When the machine used for earthmoving breaks down, what are the alternative solutions that the owner has?

Buying new construction machinery certainly has its advantages if you have the right budget.

When the budget is limited, you can repair the machine and, in the meantime, you can opt for a rental option. Repair can be done with new or recycled spare parts.Find the used spare parts komatsu volvo jcb

Many users do not like the idea of ​​replacing their old machine with a new one, both for economic reasons and for reasons of difficulty in learning new technologies. If the operator uses the machine well and is productive, a repair is a good solution.

Some owners, for example, would choose to repair any component with the goal of maximizing the overall life expectancy of their machine. Continue reading Buying a new machine or thinking about alternative solutions like leasing, renting or repairing?

Online shopping in the time of covid-19: considerations and advice

Many construction machine owners may be concerned about purchasing spare parts during COVID -19. The need to avoid contact, as well as various travel restrictions, can make shopping nearly impossible.

These reasons, combined with the need to save, lead the owner of heavy machinery to seek practical and convenient solutions. Even before the pandemic, used parts and equipment were bought online, but from now on this type of transaction will increasingly become the norm. Buyers will choose to buy from companies that have products with a high value and a quick and easy buying process.

In fact, the recent COVID-19 outbreak has changed the way we interact with customers. In our case, we received visits from many clients, national and international, who came to “know personally” our company. In this situation, all this has become impossible, so we have implemented a series of strategies to share online as much information as possible about our business and our company.used spare parts komatsu volvo jcb catalog

Buying spare parts for excavators, loaders, backhoe loaders, bulldozers, dump trucks etc., is not like buying a book or a mobile phone. It is necessary for the buyer to know exactly what he needs and, if he does not know, to provide all the technical information to the seller.

In recent years (source Oberlo.com) online shopping has increased by more than 150% and there has been a significant growth, especially in 2020. This has made it possible for online scams to grow too.

In the next paragraph we will give you some useful tips to buy online and avoid scams. Continue reading Online shopping in the time of covid-19: considerations and advice

Increase machine productivity and efficiency through spare parts management

Any component with moving parts has a limited life cycle.

A construction machine owner should consider a well-planned spare parts system having the right spare parts. Having parts on hand offers a greater chance of eliminating unwanted downtime.Find the used spare parts komatsu volvo jcb

When the machine stops, the losses are multiple, such as employee inactivity, lost of contracts and orders, just to name a few.

It should not be overlooked that in the event that the machine stops due to a breakdown, the inability to have the correct replacement parts can lead to higher costs. For example such as the additional costs of requesting a fast delivery or the safety risk by implementing an improper repair to try to get the machine working again without the proper replacement.

Having a basic supply of spare parts on hand can reduce the risks and problems identified above.

But how do you know which spare parts a heavy machine owner should always have available?

First, it is necessary to identify which machines have the greatest impact on production. Consequently, focusing on older machines that are no longer in production, as replacement parts can be difficult to obtain. It is very important consider when request parts, especially at short notice, and therefore forced to go to the non–genuine parts market of usually poor quality.

Therefore, the objective of spare parts management should be to ensure the lowest possible overall cost, both in economic terms and in terms of productivity.

Spare parts management is a determining factor for better machine efficiency.used industrial tyres and rims

Maintenance of machines and organization of spare parts

Routine maintenance implies the need to organize an efficient system of available spare parts. An understanding of which cannot be dispensed whit.

For scheduled maintenance, on the other hand, spare parts must be requested within a specified period. For these, it is useless to manage the warehouse, it is rather useful to know the life cycle of each important component for the functionality of the machine.

What can the maintenance manager do to keep everything under control?

First, you must generate consumption statistics and then maintain a close collaboration with the suppliers of the parts to ensure their availability with acceptable delivery times. In addition, you must constantly communicate with maintenance technicians to know the status of machines in real time and classify spare parts according to their strategic importance.used spare parts komatsu volvo jcb catalog

Therefore, it is advisable to always have the so-called critical spare parts available, that is, those that reduce machine downtime due to breakdowns.

It is understandable that a company does not have the financial availability to buy, for example, a transmission or an engine and keep them in stock. But a machine which doesn’t work cannot be afforded.

To overcome these problems, you can contact Taop Parts. We have thousands of spare parts available for machines such as wheel loaders, excavators, dump truck, bulldozers, backhoe, loaders etc.

Taop Parts offers recycled, original, verified and reliable spare parts that save money for the machine owner, but above all it gives you the opportunity to have your own warehouse for spare parts, especially for critical ones.

Links of interest:

Tires or chains?

Today we will treat with a very important topic concerning the difference between wheeled and crawler machines.

Let’s start with the first statement: earthmoving machines have wheeled and crawler versions and various factors come into play when it comes to choosing between them. These are factors related to the type of work to perform, the type of surface on which to carry it out, the load capacity, etc.used spare parts komatsu volvo jcb catalog Continue reading Tires or chains?

Presentation of machinery catalog updated 2020

Catalog updated 2020

 

our machine's fleet

Spare parts available: Engine, Transmission, Refrigeration, Electrical System, Hydraulic System, Pneumatic System, Axes and Filming.

Therefore, we have more than 10,000 spare parts in our stock.